Chimney Fire Dangers and Prevention | Dss Roofing

Chimney fires can be loud and dramatic, attracting the attention of neighbors and passers-by. The top of the chimney can erupt in flames or thick smoke. A deep rumbling sound, similar to that of a freight train or a low-flying jet, has alarmed residents. However, you are just aware of the chimney flames. Slow-burning chimney fires aren't as spectacular or noticeable because they don't get enough oxygen or have enough wood. However, the temperatures they hit are very high, and they will ruin the chimney system - as well as adjacent combustible areas of the building - just as much as their more impressive relatives. Chimney fires can be avoided completely with adequate chimney system maintenance. DSS Roofing is one of the best Chimney Repair in New York along with other roofing services.

A Chimney Fire's Effect on Your Chimney:

• Chimneys made of masonry: The high temperatures at which chimney fires burn (around 2000°F) will "melt mortar, break tiles, cause liners to crumble, and destroy the exterior masonry material" in masonry chimneys, whether they are older, unlined types or tile-lined to meet current safety standards. The most common cause of thermal shock is when tiles break and mortar is displaced, allowing flames to penetrate the house's combustible wood frame. 

• Metal chimneys that are prefabricated and installed in a warehouse: Factory-built metal chimneys intended to vent wood burning stoves or prefabricated metal fireplaces must pass specific checks to be mounted in most jurisdictions in the United States. The chimney must be able to tolerate flue temperatures of up to 2100°F without being damaged in most experiments. Harm to these devices can also occur in the event of a chimney fire. When a chimney fire damages prefabricated, factory-built metal chimneys, they should no longer be used and must be replaced.

• Wood Stove Special Effects: Wood stoves are designed to keep hot fires contained. It's a different story with the connector pipes that link the stove to the chimney. They can warp, buckle, and even separate from the vibrations caused by air turbulence during a fire because they can't withstand the high temperatures produced by a chimney fire. They must be demolished if they have been destroyed by a chimney fire.

Chimney Fire Prevention:

To begin, get your stove or fireplace inspected by a National Fireplace Institute (NFI) accredited specialist or a trained chimney sweep once a year. Try the following to avoid a flue fire in your home:

• Make use of dried wood: The more moisture in your wood, the more likely creosote accumulation can occur on the pipping.

• Heat up the fire: You can produce more heat for a longer period if you use tougher wood. As a result, less creosote is made. Creosote may also be burned out by hotter flames. Ponderosa Pine and Juniper are examples of pitch-heavy or sappy woodland to avoid.

• Your Chimney Should Be Cleaned: You can have creosote accumulation if smoke is coming out of your door rather than the pipping.

• Make Sure You Cut The Firewood Properly: When firewood is cut to the proper amount, it will help reduce creosote accumulation over time. For more please Visit on -